Skip to content

Unreliable tuning with sundtek tuner #1145

Closed

Description

@andrewjw

Hi,

I am trying to use minisatip with a Sundtek USB DVB-S/S2 tuner. It works, but tuning is unreliable. I can reliably tune with the /opt/bin/mediaclient program supplied by Sundtek, so I am trying to work out what the difference is.

Is is a log file from the Sundtek driver show two attempts to tune to the 11567.5 multiple on one of the Astra 2 satellites.

2024-06-20 14:37:44 [702573] [FE1] Disabling High Tone (22khz)
2024-06-20 14:37:44 [702573] [FE1] Set Voltage 13V
2024-06-20 14:37:45 [702573] DISEQC> sending commands:
2024-06-20 14:37:45 [702573] DISEQC> e0
2024-06-20 14:37:45 [702573] DISEQC> 10
2024-06-20 14:37:45 [702573] DISEQC> 38
2024-06-20 14:37:45 [702573] DISEQC> f0
2024-06-20 14:37:45 [702573] DISEQC> done
2024-06-20 14:37:45 [702573] [FE1] Disabling High Tone (22khz)
2024-06-20 14:37:45 [702573] Diseqc execution time: 82 ms
2024-06-20 14:37:45 [702573] [FE1] Disabling High Tone (22khz)
2024-06-20 14:37:45 [702573] diseqc send burst Unmodulated (SEC_MINI_A)
2024-06-20 14:37:45 [702573] [FE1] Disabling High Tone (22khz)
2024-06-20 14:37:45 [702573] [FE1] Disabling High Tone (22khz)
2024-06-20 14:37:46 [702573] [FE1] Setting Frequency: 1817500
2024-06-20 14:37:46 [702573] [FE1] Setting DVB-S
2024-06-20 14:37:46 [702573] [FE1] Frequency: 1817
2024-06-20 14:37:46 [702573] [FE1] Symbolrate: 22000
2024-06-20 14:39:00 [702573] [FE1] . o ( Enabling Standby ) o .
2024-06-20 14:39:00 [702573] [FE1] Set Voltage off
2024-06-20 14:41:55 [702573] [FE1] . o ( Waking up from standby ) o .
2024-06-20 14:41:55 [702573] [FE1] Set Voltage 13V
2024-06-20 14:41:55 [702573] [FE1] Set Voltage 13V
2024-06-20 14:41:55 [702573] [FE1] Disabling High Tone (22khz)
2024-06-20 14:41:55 [702573] [FE1] Setting Frequency: 1817500
2024-06-20 14:41:55 [702573] [FE1] Setting DVB-S
2024-06-20 14:41:55 [702573] [FE1] Frequency: 1817
2024-06-20 14:41:55 [702573] [FE1] Symbolrate: 22000
2024-06-20 14:41:55 [702573] [FE1] Frontend has locked
2024-06-20 14:42:16 [702573] [FE1] . o ( Enabling Standby ) o .
2024-06-20 14:42:16 [702573] [FE1] Set Voltage off

The first tuning attempt is from minisatip, and there is no "Frontend has locked" line. The second attempt is using the mediaclient command, and it is successful. The only difference appears to be that minisatip sends some diseqc commands. My knowledge in this area is not good, but I don't have a diseqc device - the tuner is wired directly into a universal LNB. Could this be causing issues? How do I disable the diseqc commands. I've tried using the -d parameter, both -d *:*0-0 and -d *:.0-0 and neither appeared to stop the commands from being sent.

Any help you could provide would be appreciated.

Many thanks,
Andrew

Activity

  1. sundtek commented on Sep 16, 2024

    @sundtek

    When standby kicks in it might possibly reset the multiswitch.
    For this instance you would have to disable standby

    eg. /etc/sundtek.conf
    standby_timeout=50000

    I think that value should do, it's 50 seconds.

  2. Repository owner locked and limited conversation to collaborators on Nov 25, 2025
  3. converted this issue into a discussion #1329 on Nov 25, 2025
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

No one assigned

    Labels

    No labels
    No labels

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions