Lind-Project · rishabhBudhouliya · Aug 13, 2026 · Aug 13, 2026 · Aug 13, 2026 · Aug 30, 2026
diff --git a/Docker/Dockerfile.dev b/Docker/Dockerfile.dev
@@ -132,7 +132,8 @@ RUN install -D -m 0755 /home/${USERNAME}/lind-wasm/scripts/bin/lind_compile /usr
 # Replace copied helper scripts with symlinks so local edits are reflected.
 RUN rm -f /usr/local/bin/lind_compile /usr/local/bin/lind_run \
  && ln -sf /home/${USERNAME}/lind-wasm/scripts/bin/lind_compile /usr/local/bin/lind_compile \
- && ln -sf /home/${USERNAME}/lind-wasm/scripts/bin/lind_run     /usr/local/bin/lind_run
+ && ln -sf /home/${USERNAME}/lind-wasm/scripts/bin/lind_run     /usr/local/bin/lind_run \
+ && ln -sf /home/${USERNAME}/lind-wasm/scripts/bin/lind_checkenv /usr/local/bin/lind_checkenv
 USER ${USERNAME}
 
 CMD ["/bin/bash"]
diff --git a/Makefile b/Makefile
@@ -235,6 +235,13 @@ md_generation:
 	@echo "Wrote $(OUT)/e2e_comment.md"
 
 
+# Verify the host has everything needed to build and run lind-wasm.
+# Use `make checkenv BUILD_ONLY=1` on a fresh checkout to skip the checks for
+# artifacts that `make build` has not produced yet.
+.PHONY: checkenv
+checkenv:
+	./scripts/bin/lind_checkenv $(if $(BUILD_ONLY),--build)
+
 .PHONY: lint
 lint:
 	cargo fmt --check --all --manifest-path src/wasmtime/Cargo.toml

diff --git a/README.md b/README.md
@@ -17,6 +17,11 @@ Check out the [Getting started](https://lind-project.github.io/lind-wasm/getting
 guide for a Hello World! example and [our docs](https://lind-project.github.io/lind-wasm/)
 to learn more about Lind!
 
+**Supported platforms:** `lind-wasm` targets **linux/amd64**. A native build
+requires x86-64 Linux (tested on Ubuntu 22.04) and roughly 20 GB of free disk
+space. On other hosts, use the development image with `--platform=linux/amd64`.
+Run `make checkenv` to verify a machine.
+
 
 
 ## Repository Structure and Components

diff --git a/docs/contribute/debug-programs.md b/docs/contribute/debug-programs.md
@@ -2,35 +2,40 @@
 
 ## Debugging with GDB
 
-To debug a WebAssembly module using GDB, ensure that your module is compiled with debugging information (e.g., using the -g flag during compilation). Additionally, Wasmtime itself must be compiled in debug mode (i.e., without the --release flag) to enable effective debugging of both the runtime and the module. This allows GDB to access symbol information from both your program and Wasmtime.
+To debug a WebAssembly module using GDB, ensure that your module is compiled with debugging information (e.g., using the -g flag during compilation). Additionally, the runtime itself must be built in debug mode, with `make lind-debug`, to enable effective debugging of both the runtime and the module. This allows GDB to access symbol information from both your program and the runtime.
 
 > **Note:** Current limitations in GDB support for WebAssembly include lack of instruction-level inspection. Commands like `layout split` and `si` (step instruction) may break the terminal. It’s recommended to use `layout src` for source-level debugging.
 
+> **Note:** GDB debugs the Rust runtime, not the C code running inside the WebAssembly module.
+
 ---
 
-### Running GDB with Wasmtime
+### Running GDB with the runtime
 
-Use the following command to start GDB with Wasmtime:
+Build the debug runtime, then start GDB against it:
 
 ```sh
-gdb --args ../wasmtime/target/debug/wasmtime run -D debug-info -O opt-level=0 malloc-test.wasm
+make lind-debug
+sudo gdb --args ./build/lind-boot malloc-test.cwasm
 ```
 
 **Explanation of arguments:**
 
 - `gdb --args`: Passes arguments to the program through GDB.
-- `../wasmtime/target/debug/wasmtime run`: Runs your WebAssembly module using the Wasmtime binary.
-- `-D debug-info`: Enables Wasmtime’s debug information support.
-- `-O opt-level=0`: Disables optimizations for easier debugging.
+- `sudo`: The runtime `chroot`s into `lindfs`, which requires root. `scripts/bin/lind_run` normally does this for you.
+- `./build/lind-boot`: The runtime binary. `make lind-debug` installs the debug build here, at the same path as the release build.
+- `malloc-test.cwasm`: Your program, as a path *inside* `lindfs` (see [Getting Started](../getting-started.md#what-just-happened)).
+
+Run `./build/lind-boot --help` for the full set of runtime options.
 
 ---
 
 ### Example Debugging Session
 
 1. **Start GDB**  
-   Launch GDB with Wasmtime and your WebAssembly module:
+   Launch GDB with the runtime and your WebAssembly module:
    ```sh
-   gdb --args ../wasmtime/target/debug/wasmtime run -D debug-info -O opt-level=0 malloc-test.wasm
+   sudo gdb --args ./build/lind-boot malloc-test.cwasm
    ```
 
 2. **Set Breakpoints**  

diff --git a/docs/contribute/dev-container.md b/docs/contribute/dev-container.md
@@ -1,6 +1,16 @@
+# Development setup
+
 To access an environment with the source code and tooling, there is a development image available as well.  
 (Note: If you intend to use perf, you will need to install the appropriate `linux-tools-xxx` for your kernel)
 
+> **Note:** Despite the page name, this is a plain Docker image — there is no
+> `.devcontainer/` in the repository, so VS Code's "Reopen in Container" will not
+> pick it up automatically.
+
+The published image is prebuilt: it already contains a compiled runtime, sysroot
+and `lindfs`, so you can run a program without building anything. See
+[Getting Started](../getting-started.md) for the quickest path.
+
 ```
 docker pull --platform=linux/amd64 securesystemslab/lind-wasm-dev # this might take a while ...
 docker run --platform=linux/amd64 -it --privileged --ipc=host --init --cap-add=SYS_PTRACE securesystemslab/lind-wasm-dev /bin/bash

diff --git a/docs/contribute/e2e-testing.md b/docs/contribute/e2e-testing.md
@@ -75,9 +75,10 @@ Runs `scripts/build/make_glibc_and_sysroot.sh` to:
 
 
 
-### make wasmtime
+### make lind-boot
 
-- Builds the embedded Wasmtime with Cargo (release) from `src/wasmtime/`.
+- Builds the runtime with Cargo (release) from `src/lind-boot/`, which embeds the
+  customized Wasmtime, and installs it as `build/lind-boot`.
 
 
 ### make test
@@ -132,7 +133,7 @@ High level:
 `docker buildx create --use --name lind-builder || docker buildx use lind-builder`
 
 #### Build with cache import/export
-`docker buildx build --platform=linux/amd64 -f Docker/Dockerfile.e2e --cache-from type=local,src=~/.cache/docker-buildx --cache-to type=type=local,dest=.~/.cache/docker-buildx,mode=max .`
+`docker buildx build --platform=linux/amd64 -f Docker/Dockerfile.e2e --cache-from type=local,src=~/.cache/docker-buildx --cache-to type=local,dest=~/.cache/docker-buildx,mode=max .`
 
 > CI typically uses type=gha; locally a local cache is simple and reliable.
 

diff --git a/docs/contribute/running-on-native-linux.md b/docs/contribute/running-on-native-linux.md
@@ -120,19 +120,15 @@ The dependencies require a significant amount of storage so 15-20gb of free spac
    source "$HOME/.cargo/env"
    ```
 
-   Install the pinned nightly toolchain and `rust-src` component:
+   The repository pins its toolchain in
+   [`rust-toolchain.toml`](https://github.com/Lind-Project/lind-wasm/blob/main/rust-toolchain.toml),
+   and `rustup` installs and selects that channel automatically the first time you
+   build inside the repository. Do not pin a different nightly by hand:
+   `rust-toolchain.toml` wins at build time, so a toolchain you select manually —
+   and any components you add to it — is silently ignored.
 
-   ```bash
-   rustup toolchain install nightly-2026-02-11 \
-     --profile minimal \
-     --component rust-src
-   ```
-
-   Verify the installation:
-
-   ```bash
-   rustc +nightly-2026-02-11 --version
-   ```
+   The `rust-src` component still has to be added explicitly. Because that must
+   happen against the pinned channel, it is done after cloning, in step 8.
 
 4. __Install WABT 1.0.38__
 
@@ -243,16 +239,36 @@ The dependencies require a significant amount of storage so 15-20gb of free spac
 
 8. __Build Lind-Wasm__
 
-   From the repository root, build the development runtime, Lind filesystem,
-   custom glibc, and sysroot:
+   From the repository root, add `rust-src` to the pinned toolchain. Running this
+   inside the repository is what makes `rustup` resolve `rust-toolchain.toml`:
 
    ```bash
    cd ~/lind-wasm
-   make lind-debug
+   rustup component add rust-src
+   rustup show active-toolchain
+   ```
+
+   Check that the machine has everything else it needs. Every `FAIL` comes with
+   the command that fixes it:
+
+   ```bash
+   make checkenv BUILD_ONLY=1
+   ```
+
+   Then build the runtime, Lind filesystem, custom glibc, and sysroot:
+
+   ```bash
+   make build
    ```
 
+   Use `make build` rather than the individual targets: `make lind-boot sysroot`
+   skips the `lindfs` target, and `make sysroot` on its own fails on a clean
+   checkout because building the shared libc needs `lind-boot` to exist already.
+   For a debug runtime use `make lind-debug` instead — but do not mix the two, or
+   you will get `unknown import: debug::lind_debug_num` at run time.
+
    See the project [`Makefile`](https://github.com/Lind-Project/lind-wasm/blob/main/Makefile) for the individual build
-   targets.
+   targets and build knobs.
 
 9. __Install the Lind helper commands__
 
@@ -301,9 +317,12 @@ The dependencies require a significant amount of storage so 15-20gb of free spac
 
 10. __Create the Lind filesystem compatibility link__
 
-    The current runtime expects `lindfs` at
-    `/home/lind/lind-wasm/lindfs`. When the WSL username is not `lind`,
-    create a compatibility symbolic link:
+    The runtime `chroot`s into a path that is compiled in as a constant —
+    `LINDFS_ROOT` in `src/sysdefs/src/constants/lind_platform_const.rs`, currently
+    `/home/lind/lind-wasm/lindfs`. It is not read from the environment, so a
+    checkout anywhere else panics at startup with `The configured lindfs does not
+    exist`. Unless your home directory is literally `/home/lind`, create a
+    compatibility symbolic link:
 
     ```bash
     sudo mkdir -p /home/lind
@@ -333,7 +352,7 @@ The dependencies require a significant amount of storage so 15-20gb of free spac
 
     ```bash
     cd ~/lind-wasm
-    lind_compile -s hello.c
+    lind_compile hello.c
     ```
 
     Run the compiled program using its path inside `lindfs`:
@@ -348,6 +367,18 @@ The dependencies require a significant amount of storage so 15-20gb of free spac
     Hello, World!
     ```
 
+    Two things to expect the first time:
+
+    - `lind_run` prompts for a password. It re-executes itself under `sudo -E`
+      because the runtime needs root to `chroot`.
+    - The path is `/hello.cwasm`, not `./hello.cwasm`. `lind_compile` copies its
+      output into `lindfs/`, and the runtime `chroot`s there, so paths are relative
+      to `lindfs` rather than to your shell's working directory.
+
+    `lind_compile` builds dynamically by default, resolving *lind-glibc* from
+    `lindfs/lib/libc.cwasm` at run time. Pass `-s` for a statically linked binary,
+    which does not need the shared libc to be present.
+
 12. __Run the full test suite__
 
     From the repository root, run the full test suite. It can take a while, so

diff --git a/docs/contribute/testing.md b/docs/contribute/testing.md
@@ -31,18 +31,16 @@ docker build --platform=linux/amd64 -f Docker/Dockerfile.e2e -t dev --target bas
 
 docker run --platform=linux/amd64 -v $(PWD):/lind -w /lind -it dev /bin/bash
 ```
-5. Build toolchain (glibc and wasmtime)
+5. Build the toolchain (runtime, glibc sysroot and `lindfs`)
 ```
 # this may take a while ...
-make lind-boot sysroot
+make build
 ```
 6. Run the test suite 
 ```
 ./scripts/test/harnesses/wasmtestreport.py
-./scripts/test/harnesses/wasmtestreport.py
 ```
 Run `scripts/test/harnesses/wasmtestreport.py --help` to list available usage options.
-Run `scripts/test/harnesses/wasmtestreport.py --help` to list available usage options.
 
 ## Directory Structure
 

diff --git a/docs/contribute/toolchain.md b/docs/contribute/toolchain.md
@@ -50,10 +50,11 @@ options.
         along with headers and a pre-built C runtime into a
         sysroot directory structure as required by *Clang*.
 
-4. __Build custom wasmtime__ (see [`make wasmtime`](https://github.com/Lind-Project/lind-wasm/blob/main/Makefile))
+4. __Build the runtime__ (see [`make lind-boot`](https://github.com/Lind-Project/lind-wasm/blob/main/Makefile))
 
-      Builds `src/wasmtime` workspace. Custom dependencies `fdtables`, `RawPOSIX`
-      and `sysdefs` are included in the build automatically.
+      Builds the `src/lind-boot` workspace into `build/lind-boot`. The customized
+      `wasmtime` and the `fdtables`, `RawPOSIX`, `threei` and `sysdefs` crates are
+      included in the build automatically.
 
 
 A customized `wasm-opt` binary is included in the *lind-wasm* repo under