diff --git a/source/_integrations/bitvis.markdown b/source/_integrations/bitvis.markdown
new file mode 100644
index 000000000000..1b2ddc04c32e
--- /dev/null
+++ b/source/_integrations/bitvis.markdown
@@ -0,0 +1,116 @@
+---
+title: Bitvis Power Hub
+description: Read real-time electricity data from your smart meter with the Bitvis Power Hub integration for Home Assistant.
+ha_release: 2026.4
+ha_category:
+  - Energy
+  - Sensor
+ha_platforms:
+  - sensor
+ha_iot_class: Local Push
+ha_config_flow: true
+ha_zeroconf: true
+ha_codeowners:
+  - '@MandusBorjesson'
+  - '@simontegelid'
+ha_domain: bitvis
+ha_integration_type: device
+---
+
+The **Bitvis Power Hub** {% term integration %} reads real-time electricity data from a [Bitvis Power Hub](https://bitvis.se/) device. The Power Hub connects to the <abbr title="Home Area Network">HAN</abbr> port (a standard port on European smart meters) on your smart electricity meter and pushes measurements to Home Assistant over your local network using UDP.
+
+Because data is pushed directly from the device, no cloud connection or polling is required.
+
+## Prerequisites
+
+Before adding the integration, make sure:
+
+- Your Bitvis Power Hub is connected to your local network and configured to send data to the IP address of your Home Assistant host on the UDP port above (default: `58220`).
+- Your router or firewall allows UDP traffic from the Power Hub to Home Assistant on that port.
+
+{% note %}
+The Bitvis Power Hub and Home Assistant must be on the same network subnet, or your router/firewall must be configured to forward UDP traffic between them.
+{% endnote %}
+
+{% include integrations/config_flow.md %}
+
+{% configuration_basic %}
+Host:
+  description: The hostname or IP address of your Bitvis Power Hub on your local network.
+Port:
+  description: The UDP port Home Assistant listens on for data from the device. Defaults to `58220`.
+Name:
+  description: A friendly name for this device in Home Assistant.
+{% endconfiguration_basic %}
+
+## Sensors
+
+The following sensors are provided, depending on the capabilities of your smart meter:
+
+### Power
+
+- **Active power import**
+  - **Description**: Total active power consumed from the grid (kW).
+
+- **Active power export**
+  - **Description**: Total active power delivered to the grid (kW).
+
+- **Active power import L1/L2/L3**
+  - **Description**: Per-phase active power consumed (kW).
+
+- **Active power export L1/L2/L3**
+  - **Description**: Per-phase active power delivered (kW).
+
+- **Reactive power import**
+  - **Description**: Total reactive power consumed (kvar).
+
+- **Reactive power export**
+  - **Description**: Total reactive power delivered (kvar).
+
+- **Reactive power import L1/L2/L3**
+  - **Description**: Per-phase reactive power consumed (kvar).
+
+- **Reactive power export L1/L2/L3**
+  - **Description**: Per-phase reactive power delivered (kvar).
+
+### Voltage and current
+
+- **Voltage L1/L2/L3**
+  - **Description**: Phase voltages (V).
+
+- **Current L1/L2/L3**
+  - **Description**: Phase currents (A).
+
+### Energy
+
+- **Active energy import**
+  - **Description**: Cumulative active energy consumed from the grid (kWh).
+
+- **Active energy export**
+  - **Description**: Cumulative active energy delivered to the grid (kWh).
+
+- **Reactive energy import**
+  - **Description**: Cumulative reactive energy consumed (kvarh).
+
+- **Reactive energy export**
+  - **Description**: Cumulative reactive energy delivered (kvarh).
+
+## Diagnostic sensors
+
+The following diagnostic sensors are also available:
+
+- **Uptime**
+  - **Description**: Estimated time the device was last started. Timestamp.
+
+- **Wi-Fi signal strength**
+  - **Description**: Received signal strength (dBm).
+
+- **HAN messages successfully parsed**
+  - **Description**: Counter of successfully parsed HAN port messages.
+
+- **HAN buffer overflows**
+  - **Description**: Counter of HAN port buffer overflow events.
+
+## Removing the integration
+
+{% include integrations/remove_device_service.md %}