Thank you for your code!
Actually, i encountered a question about gre proto.
I use scapy to simulate the keepalive packet.
###[ IP ]###
version = 4
ihl = None
tos = 0x0
len = None
id = 1
flags =
frag = 0
ttl = 64
proto = gre
chksum = None
src = 192.168.122.219
dst = 192.168.122.105
\options \
###[ GRE ]###
chksum_present= 0
routing_present= 0
key_present= 0
seqnum_present= 0
strict_route_source= 0
recursion_control= 0
flags = 0
version = 0
proto = IPv4
###[ IP ]###
version = 4
ihl = None
tos = 0x0
len = None
id = 1
flags =
frag = 0
ttl = 64
proto = gre
chksum = None
src = 192.168.122.105
dst = 192.168.122.219
\options \
###[ GRE ]###
chksum_present= 0
routing_present= 0
key_present= 0
seqnum_present= 0
strict_route_source= 0
recursion_control= 0
flags = 0
version = 0
proto = 0x0
###[ Raw ]###
load = 'Keepalive Request for gre test'
But when debugging i found it with wrong proto.
<idle>-0 [002] d.s.1 590924.419672: bpf_trace_printk: New packet
<idle>-0 [002] dNs.1 590924.419691: bpf_trace_printk: Packet header dump:
<idle>-0 [002] dNs.1 590924.419692: bpf_trace_printk: #0: 45
<idle>-0 [002] dNs.1 590924.419692: bpf_trace_printk: #1: 0
<idle>-0 [002] dNs.1 590924.419692: bpf_trace_printk: #2: 0
<idle>-0 [002] dNs.1 590924.419693: bpf_trace_printk: #3: 36
<idle>-0 [002] dNs.1 590924.419693: bpf_trace_printk: #4: 0
<idle>-0 [002] dNs.1 590924.419693: bpf_trace_printk: #5: 1
<idle>-0 [002] dNs.1 590924.419693: bpf_trace_printk: #6: 0
<idle>-0 [002] dNs.1 590924.419694: bpf_trace_printk: #7: 0
<idle>-0 [002] dNs.1 590924.419694: bpf_trace_printk: #8: 40
<idle>-0 [002] dNs.1 590924.419694: bpf_trace_printk: #9: 2f
<idle>-0 [002] dNs.1 590924.419695: bpf_trace_printk: #10: 4
<idle>-0 [002] dNs.1 590924.419695: bpf_trace_printk: #11: 3
<idle>-0 [002] dNs.1 590924.419695: bpf_trace_printk: #12: c0
<idle>-0 [002] dNs.1 590924.419695: bpf_trace_printk: #13: a8
<idle>-0 [002] dNs.1 590924.419696: bpf_trace_printk: #14: 7a
<idle>-0 [002] dNs.1 590924.419696: bpf_trace_printk: #15: 69
<idle>-0 [002] dNs.1 590924.419696: bpf_trace_printk: #16: c0
<idle>-0 [002] dNs.1 590924.419696: bpf_trace_printk: #17: a8
<idle>-0 [002] dNs.1 590924.419697: bpf_trace_printk: #18: 7a
<idle>-0 [002] dNs.1 590924.419697: bpf_trace_printk: #19: db
<idle>-0 [002] dNs.1 590924.419697: bpf_trace_printk: #20: 0
<idle>-0 [002] dNs.1 590924.419697: bpf_trace_printk: #21: 0
<idle>-0 [002] dNs.1 590924.419698: bpf_trace_printk: #22: 0
<idle>-0 [002] dNs.1 590924.419698: bpf_trace_printk: #23: 0
<idle>-0 [002] dNs.1 590924.419698: bpf_trace_printk: #24: 4b
<idle>-0 [002] dNs.1 590924.419698: bpf_trace_printk: #25: 65
<idle>-0 [002] dNs.1 590924.419699: bpf_trace_printk: #26: 65
<idle>-0 [002] dNs.1 590924.419699: bpf_trace_printk: #27: 70
<idle>-0 [002] dNs.1 590924.419699: bpf_trace_printk: #28: 61
<idle>-0 [002] dNs.1 590924.419699: bpf_trace_printk: #29: 6c
<idle>-0 [002] dNs.1 590924.419700: bpf_trace_printk: #30: 69
<idle>-0 [002] dNs.1 590924.419700: bpf_trace_printk: #31: 76
<idle>-0 [002] dNs.1 590924.419700: bpf_trace_printk: Outer GRE flags=0x0 proto=0
<idle>-0 [002] dNs.1 590924.419701: bpf_trace_printk: Outer GRE bpf_htons=0x8 proto=0
<idle>-0 [002] dNs.1 590924.419702: bpf_trace_printk: Inner GRE dataptr=144793918 proto=44 data_end=144793948
Could you help with this problem?
Thank you for your code!
Actually, i encountered a question about gre proto.
I use scapy to simulate the keepalive packet.
But when debugging i found it with wrong proto.
Could you help with this problem?